Temperature (EEMS12)

Activate the Temperature Module

The Graphical User Interface (GUI) for the Temperature module in EE can be activated from the EFDC+ Modules, as shown in Temperature (EEMS12)#Figure 1.

Open

Figure 1.  Active Temperature Modules.

After RMC on the Temperature module, the user can access the Settings, Initial Conditions, and Time Series options (Temperature (EEMS12)#Figure 2).

Open

Figure 2.  Temperature Module: RMC Options.

In order to set up the Temperature Module, the user should RMC Settings and then the Temperature Parameters form is displayed with six tabs. Each tab has different parameters that can be modified as described in the following sections (Temperature (EEMS12)#Figure 3).

• Heat Exchange

• Solar Radiation

• Evaporation

• Initial Conditions

• Boundary Conditions

• Ice

Open

Figure 3. Temperature Parameters.