Wave Parameters

Owned by Kester Scandrett
Last updated: 08 Jul, 2016 by Duy Pham
1 min read

If the wave options have been activated (Active Modules tab) then Viewing Opt | Wave Parameter will be available. This feature displays the 2D assignment of the wave parameters. The input parameters that can be displayed are:

  • Wave Cells
  • Wave Energy.
  • Wave Height.
  • Radiation Shear Stress: XX Component.
  • Radiation Shear Stress: YY Component.
  • Radiation Shear Stress: XY Component.
  • Dissipation Losses.
  • Wave Angle.
  • Wave Period

In addition, the derived parameters listed below are available:

  • Total Depth (with wave heights).
  • Water Surface (with wave heights).