Wave Parameters

Owned by Kester Scandrett

Last updated: 08 Jul, 2016 by Duy Pham

1 min read

If the wave options have been activated (Active Modules tab) then Viewing Opt | Wave Parameter will be available. This feature displays the 2D assignment of the wave parameters. The input parameters that can be displayed are:

Wave Cells
Wave Energy.
Wave Height.
Radiation Shear Stress: XX Component.
Radiation Shear Stress: YY Component.
Radiation Shear Stress: XY Component.
Dissipation Losses.
Wave Angle.
Wave Period

In addition, the derived parameters listed below are available:

Total Depth (with wave heights).
Water Surface (with wave heights).