Card Image 39

C39 COHESIVE SEDIMENT PARAMETER SET 1 REPEAT DATA LINE NSED TIMES

* DATA REQUIRED IF NSED>0, EVEN IF ISTRAN(6) = 0

*

* SEDO: CONSTANT INITIAL COHESIVE SEDIMENT CONC IN WATER COLUMN

* (MG/LITER=GM/M^3)

* SEDBO: CONSTANT INITIAL COHESIVE SEDIMENT IN BED PER UNIT AREA

* (GM/SQ METER) IE 1CM THICKNESS BED WITH SSG=2.5 AND

* N=.6,.5 GIVES SEDBO 1.E4, 1.25E4

* SDEN: SEDIMENT SPEC VOLUME (IE 1/2.25E6 M^3/GM)

* SSG: SEDIMENT SPECIFIC GRAVITY

* WSEDO: CONSTANT OR REFERENCE SEDIMENT SETTLING VELOCITY

* IN FORMULA WSED=WSEDO*( (SED/SEDSN)**SEXP )

* SEDSN: (NOT USED)

* SEXP: (NOT USED)

* TAUD: BOUNDARY STRESS BELOW WHICH DEPOSITION TAKES PLACE ACCORDING

* TO (TAUD-TAU)/TAUD

* ISEDSCOR: 1 TO CORRECT BOTTOM LAYER CONCENTRATION TO NEAR BED CONCENTRATION

* ISPROBDEP: 0 KRONE PROBABILITY OF DEPOSITION USING COHESIVE GRAIN STRESS

*                       1 KRONE PROBABILITY OF DEPOSITION USING TOTAL BED STRESS

*                       2 PARTHENIADES PROBABILITY OF DEPOSITION USING COHESIVE GRAIN STRESS

*                       3 PARTHENIADES PROBABILITY OF DEPOSITION USING TOTAL BED STRESS

*