Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

When user select erosion rates option as Lookup Table and Bed Properties as Core ID in General tab, Erosion Rates tab provides the user with the Active and Deposited Sediments Erosion matrix as shown in Figure 1 below. In the table under Active and Deposited Sediments Erosion Rate Matrix frame, user should define the erosion rates for each grain size class by shear categories.

Figure 1  Erosion Rates Option 1 - Erosion Rates tab.

In Core Definitions tab, in SEDFlume Measured Erosion Rates frame, the table allows the user define the erosion rates for each layer of each core by shear categories as shown in Figure 2.

Figure 2  Erosion Rates Option 1 - Core Definitions tab.

  • No labels