This tab (Figure 1) contains methods to assist the user to assign the initial conditions for the temperature parameters as described in the Temperature IC sections. In addition to opening the Temperature Parameters form, the Initial Conditions settings are accessible via RMC on the Temperature module (Figure 2).
Anchor Figure 1 Figure 1
Figure 1. Temperature Parameters - Initial Conditions tab.
Anchor Figure 2 Figure 2
Figure 2. Temperature Module: RMC Options.
...
Initial Conditions for Bed Temperature: It is able to set constant bed temperature by setting a value in the Uniform Bed Temperature box or check Use Spatially Variable Bed Temp and Thickness checkbox to assign a spatially varying initial temperature, by layer (Figure 5). The options and format of data files to upload to are described in Apply Cell Properties via Polygon. It also can select to apply cell properties for a specific layer or all layers in the model.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 3. Initial Conditions - Temperature Parameters.
Anchor Figure 4 Figure 4
Figure 4. Assign Initial Conditions for Water Temperature.
Anchor Figure 5 Figure 5
Figure 5. Assign Initial Conditions for Bed Temperature.