...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
When the full sediment diagenesis sub-model is activated, then EE allows you to visualize the concentrations and resulting nutrient fluxes. If you apply a constant or temporally varying fluxes method, then you can view the sediment flux zones and sediment flux rates.
To display the Sediment Diagenesis in the 2DH View, open a new 2DH View from the 2DH View menu or the 2DH View button from the main toolbar of EE main form. Then click the Add New Model Layer from the Layer Control (
...
Figure 1). In the 2DH View Option, the primary group is selected as Sediment Diagenesis. The parameter list of the full sediment diagenesis method is shown in
...
Table 1 and the sediment diagenesis parameters of the constant or temporally varying method are presented in
...
...
Figure 2 illustrates the sediment diagenesis parameter of particular organic carbon in the 2DH View.
Anchor Figure 1 Figure 1
...
Figure 1. Add a Sediment Diagenesis layer to the 2DH View.
Anchor Table 1 Table 1
Table 1. List of full sediment diagenesis parameters
Abbreviation | Parameter Name |
---|---|
Part.Org.Nitrogen | Particular Organic Nitrogen |
Part.Org.Phosphorus | Particular Organic Phosphorus |
Part.Org.Carbon | Particular Organic Carbon |
PON Sediment Flux | PON Flux between Sediment-Water |
POP Sediment Flux | POP Flux between Sediment-Water |
POC Sediment Flux | POC Flux between Sediment-Water |
NH4-N | Concentration of Ammonium |
NO3-N | Concentration of Nitrogen |
PO4-P | Concentration of Phosphorus |
H2S | Concentration of Hydrogen Sulfide |
Dissolved Silica | Concentration of Dissolved Silica |
Part.Silica | Particular Silica |
Accumulated Benthic Stress | Accumulated Benthic Stress |
Sediment Temperature | Sediment Temperature |
O2 | Concentration of Oxygen |
Ammonium Flux | Ammonium Flux between Sediment-Water |
Nitrate Flux | Nitrate Flux between Sediment-Water |
O2 Sediment Flux | Oxygen Sediment Flux between Sediment-Water |
COD Flux | Chemical Oxygen Demand Flux |
PO4 Flux | Phosphate Flux between Sediment-Water |
Silica Flux | Silica Flux between Sediment-Water |
SD Zone | Sediment Diagenesis Zone |
Anchor | ||||
---|---|---|---|---|
|
Table 2. Parameter list of a constant or temporally varying fluxes method
Abbreviation | Parameter Name |
---|---|
SF O2 | Sediment Fluxes Rate Oxygen |
SF COD | Sediment Fluxes Rate Chemical Oxygen Demand |
SF SAD | Sediment Fluxes Rate of Dissolved Available Silica |
SF NO3 | Sediment Fluxes Rate Nitrate |
SF NH4 | Sediment Fluxes Rate Ammonium |
SF PO4 | Sediment Fluxes Rate Phosphate |
SF Zone: Mud | Mud Zone |
SF Zone: Sand | Sand Zone |
SF Percent Mud | Percent Mud |
Anchor | ||||
---|---|---|---|---|
|
Figure 2. Sediment Diagenesis: Part.Org.Carbon layer in 2DH View.
To view the time series of sediment diagenesis parameters is the same as the one described in the Salinity Visualization.
2221768705 Figure 3 shows an example of the time series of the PON Sediment Flux from a selected grid cell.
Anchor Figure 3 Figure 3
Figure 3. Time Series of Sediment Diagenesis: PON Sediment Flux.