2DH View
The sediment bed and sediment in the water column can be visualized in the 2DH View. Selecting sediment parameters in the water column is shown in Figure 1. They include Total Suspended Sediments, Cohesive Sediment, and Non-cohesive Sediment.
Figure 1. Add Sediment in water column in 2DH View.
Selecting sediment bed parameters is shown in Figure 2. They include Bed Top Layer, Bed Thickness, Bed Density, Bed Porosity, Bed Mass, Bed Mass Fraction, Bed d50, Bed Delta, and Bed Topography.
Figure 2. Add Sediment bed in 2DH View.
In terms of the sediment SEDZLJ model, the model output of the SEDZLJ Sediment Bed has a number of special viewing options in 2DH View as shown in Figure 3. The parameters include SEDZLJ Core ID, SEDZLJ Skin Friction, SEDZLJ D50 (Active Layer), SEDZLJ Erosion Rate, SEDZLJ Deposition Rate, Net Deposition/Erosion Rate, SEDZLJ Bedload Chemical Fate and Transport, SEDZLJ Bedload Flux, SEDZLJ Bedload Vector, and SEDZLJ Bedload Mass.
Figure 3. Add Sediment bed of SEDZLJ model in 2DH View.