If the wave options have been activated (Active Modules tab) then Viewing Opt | Wave Parameter will be available. This feature displays the 2D assignment of the wave parameters. The input parameters that can be displayed are:
- Wave Cells
- Wave Energy.
- Wave Height.
- Radiation Shear Stress: XX Component.
- Radiation Shear Stress: YY Component.
- Radiation Shear Stress: XY Component.
- Dissipation Losses.
- Wave Angle.
- Wave Period
In addition, the derived parameters listed below are available:
- Total Depth (with wave heights).
- Water Surface (with wave heights).