Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

When the grid is loaded on the workspace then RMC will display a list of grid and cell operations.
Cell operations such as Deactivate/Activate Cell will only be displayed when RMCing on the grid. On the other hand, the list of Grid Operation will be displayed either when RMC on the grid or the outside of the grid as shown in Figure 6 1, Figure 6 2 and Figure 6 3. These operations are explained in detail in the following section.

Figure 6 1 Grid operations.

Figure 6 2 Grid and cell operations.

Figure 6 3 Grid and cell operations (detailed).

  • No labels