To obtain help on the keystroke functions press, F2. What is actually shown in the message box pop-up depends on what data/model results are loaded and the currently selected view. Table 7 2 provides a listing of the keystroke functions in ViewPlan.
Table 7 2 ViewPlan keystroke function summary.
Panning & Zooming |
|
Space LMC |
Pan with cursor |
Mouse Scroll |
Zoom in and out |
F3 |
Modify Pan & Zoom Increments. The size of the panning and zooming steps are adjusted here. |
F5 |
Refresh Current View |
left |
Pan East. |
right |
Pan West |
up |
Pan North |
down |
Pan South |
+ |
Zoom In |
- |
Zoom Out |
Ctrl-E |
Zoom Model Extents |
Cell Property Copy Editing |
|
Alt-LMC |
Get Property. Alt-LMC'ing on a cell will copy that cell's current property to the operator box. |
Ctrl-RMC |
Set Property. Ctrl-RMC'ing on a cell will apply the value or operator in the operator box to that cell (Copy Cell Property must be enabled) |
Smoothing of Initial Conditions Field |
|
Ctrl-S |
Smooth the Currently Selected IC Field. This applies only to bottom elevations and the water column. |
Rectangular Cell Selection (for Editing Cell Properties) |
|
|
To Select Cells in a Rectangle hold the ALT key down and Right Mouse drag. The 'Enable Edit' checkbox must be selected. |
Post Processing – Time Selection |
|
PgDn |
Show Next Snapshot |
PgUp |
Show Previous Snapshot |
Shift-PgDn |
Show Next Snapshot – Increment:12 |
Shift-PgUp |
Show Previous Snapshot – Increment:12 |
Ctrl–PgDn |
Show Previous Snapshot – Increment:120 |
Ctrl-PgUp |
Show Previous Snapshot – Increment:120 |
Ctrl-G |
Goto a Specific Date. Format of date to enter depends on whether the user is displaying Julian or Gregorian dates. |
Specific View: Water Levels, Inundation Extents |
|
Ctrl-O |
Export the displayed inundation outline as a P2D file. |
Specific View: Sediment Bed, Bed Shear Stress |
|
Alt-P |
Toggle Display of Bed Shear or Stream Power |
F7 or Ctrl-T |
Toggle Sediment Core Editing |
Specific View: Water Column |
|
Alt-B |
Conduct a Bottom Irradiance Analysis |
Alt-C |
Conduct a Volumetric Analysis |
Alt-H |
Conduct a Habitat Analysis |
Specific View: Comparison Model |
|
Alt-M |
Toggle the display of model comparison |
Alt-V |
Compute and display the volume differences between two models in bottom elevation view |
Specific View: Velocities |
|
RMC |
Define Velocity Profile (Velocity View Only) |
Calibration Data Display |
|
Ctrl-< |
Go to previous data snapshot. If calibration data has been configured and the current view is the water column, this keystroke will cause EFDC_Explorer to jump forward to the next measured data point and display the model results with the data or residuals labeled. |
Ctrl-> |
Go to next data snapshot. |
Series/Profile Locations |
|
Alt-I |
Load the Series/Profile Locations from a File |
Alt-O |
Save the Series/Profile Locations to a File |
Layout and Viewing Options |
|
Ctrl-W |
Set the View Port to a Specified Size |
Alt-W |
Set the View Port to a Specified Scale |
F6 |
Toggle Grid Display |
F7 |
Toggle Julian Date as Date Format |
F8 |
Toggle Display of Masks |
F9 |
Toggle Transparency for Current View |
F11 |
Toggle the Display of Titles |
F12 |
Toggle On/Off Greyscale Color Ramps |
Alt-K |
Save the Layout (form size, scale, legend location, etc.) to a File |
Alt-L |
Load a Layout from a File and apply it to the current view. |
Miscellaneous Functions |
|
Ctrl-A |
Animate the Current View |
Alt-E |
Export the Current View as a Metafile |
Ctrl-M |
Toggle Metric/English Display Units |
Alt-R |
Compute and Display time series plot of River Kilometer versus time for a target value. |
Ctrl-V |
View a Specified Cell using L or I,J. |
Ctrl-P |
Photo Viewer – load an image to display on the ViewPlan workspace |