Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Step-by-step guide

         1. To save any changes on a currently opened project (i.e. Write Operation), click on the disk button highlighted on the toolbar shown below. Or the user can select Save Model option in Model menu.

Figure 1. Save Model button (1).

Figure 2. Save Model button (2).

         2. The Select Directory: Write Operation form will be displayed.  The user has the option to select which files are written by selecting the appropriate Save Options button.


Figure 3. Select Directory window


        3. For a complete save of all the input files select the Full Write option. 

         4. If you have only made changes to the formatting options in EFDC_Explorer and want those saved, select the Save Profile File Only option.  The profile is always saved for the other save options also.

The Profile File is the file EFDC.EE, which contain settings of the model such as name of boundary groups, calibration stations, etc...


         5. If the user only has the “*.EFDC” archive file and wants to create a set of files that EFDC needs to run that project, the user must select the Full Write option to create all the input files required.

The user can choose 2 format options:

  • EEMS 10 can only be viewed and calculated by EFDC_Explorer and EFDC+ version 10.
  • EEMS 8.5 can be viewed by EFDC_Explorer version 8.4 or 8.5 or 10 and calculated by EFDC+ version 8.4 or 8.5.












  • No labels