In the General tab, under Erosion Rate Options the user should select the second option as shown in Figure 1. Using this option the erosion rate will be based on the equation E = A*Tau^N where "A" is the erosion multiplier, and "N" is erosion exponent, and it uses bed properties by Core ID. "A" and "N" will be defined in the Erosion Rates tab as shown in Figure 2. Moreover, the user can define the maximum erosion rate of each grain size.
Figure 1 Erosion Rates Option 2 - General tab.
Figure 2 Erosion Rates Option 2 - Erosion Rates tab.
Next, under the Core Definitions tab, the user should enter the values for the Bed Layer Properties and Grain Size Distribution table as described in Erosion Rates Option 1, for the grid frame of SEDFlume Measured Erosion Rates . The user needs to define "A", "N", and the maximum erosion rates of each sediment bed layer as shown in Figure 3.
Figure 3 Erosion Rates Option 2 - Core Definitions tab.