Often the model domain is too complex to create a single grid that accurately represents the area. Therefore, the user may have to create several grids and connect them using the Connect tool.
To connect two grids, the user must have the initial grid open. The user should then create a new layer for a new set of splines. These splines should extend from a location adjacent to the first grid and outline the new domain. Draw the farthest spline first, followed by the connection to the first grid and then the sides. When drawing the spline parallel to the first grid, ensure it is close to the edge. The user may then generate the grid making sure the number of cells in the I or J-axis of the new grid matches the number of cells connecting it to the first grid. Select the Connect Two Grids tool and click two nodes on the grid line of the second grid where it is adjacent to the first grid. An example of this is shown in, Figure 1, Figure 2 and Figure 3.
To insert a grid cell next to an existing cell, select two grid nodes of the existing cell (RMC on a node, hold the Shift key then LMC on the second node, the segment will be highlighted) then RMC to display options, select Line Mirror option as shown in Figure 1. As a result, a cell will be added that shares a grid line with the existing cell as shown in Figure 2.
Figure 1 Define where to insert a cell.
Figure 2 A cell is added to the grid.
Figure 3 Define where to insert multiple cells.
Figure 4 Multiple cells are added to the grid.