Generating a New Model

After opening EE10, there are a number of different ways to create a new model. These all start with the grid utility, and there are three different ways to open it: 

1. The first way is to click Model button on main menu toolbar, then select New Model (see Figure 1).
   
2. The second way is to click New Model button directly on main menu toolbar (see Figure 2).
3. The third way is to press Ctrl+N.

Figure 1.  Creating a New Model (1).

Figure 2.  Creating a New Model (2).

After one of these three methods are selected, the Grid Generator form appears. There are four Grid Options on the Grid Generator form. These include Generate Uniform Grid, Generate Radial Grid, Generate Telescoping Grid, and Import Grid from Files. Each of these options is described below:

Generate Uniform Grid

This option allows user to generate Cartesian grid. When the radial button for this option is selected, the Uniform Grid Options frame is shown. In this frame the user needs to enter the Lower-Left and Upper-Right coordinates, these two corner points will temporarily limit grid domain. Next, enter cell size in X and Y directions, which will define cell dimensions (width and length in meters of a cell), then click the calculator symbol for Number of Cells, the number of cells will be updated instantly. Another option is that the user enters the number of cells desired first then click the calculator symbol for Cell Size, and the dimensions of the cell will be updated.

Rotation Angle: The user should enter angle in degrees which for the grid should be rotated.

UTM Zone: This is the Universal Transverse Mercator (UTM) zone, the user can enter the zone number, from 1 to 60.

The user can then click the Generate button, and the grid will appear on the right window as shown in Figure 3. In case the user wants to save the information entered into the Uniform Grid Options frame this can be done by clicking the Save Parameters button, a Save As form will be displayed in order to allow the user enter a file name, then click the Save button to save as shown in Figure 4. This parameter settings file can be reused at another time by clicking on the Load Param button.

Figure 3.  Generate Uniform Grid.

Figure 4.  Save parameters.

In case the user wants to restrict the size of the domain they can use a bounding polygon, which is considered as a shoreline. RMC on the Bounding Polygons text box and select Add Files. The Open form appears, and the user should select the file or files needs then click Open button as shown in Figure 5.

The polygon will be loaded and the Lower-Left, Upper-Right coordinates will be updated, the user now can generate a grid based on either cell size or number of cells by clicking on Generate button. It is also possible inverse the selection, or remove the cells which are outside of the bounding polygon, by clicking the Remove Dry button as shown in Figure 6. The grid is generated with cells outside of bounding polygon removed is shown in Figure 7 in the 2DH View.

Figure 5.  Load bounding polygon file.

Figure 6.  Grid generation by using bounding polygon.

Figure 7.  Grid generated using bounding polygon.

When the grid is generated, the user can save the grid by clicking the Export Grid button, the grid can be exported as *.CVL or  *.GRD format. Click the OK button to finish generating the uniform grid.

Generate Radial Grid

This option allows the user to generate a radial grid as see Figure 8.

Figure 8.  Generate Radial Grid.

Generate Telescoping Grid

This option allows the users to generate telescoping grid as shown in Figure 9.

Figure 9.  Generate Telescoping Grid.

Import Grids from Files

This option allows user to import an existing grid file. Grid file formats that are supported include:

• CLVGrid (EEMS native format)
• RGFGrid
• Grid95
• DXDY/LYLY
• ECOMSED
• SEAGRID
• CH3D
• Corners (4)

The user should click the Import Grids radial button, and the Import Grid form will be displayed. From here the user should select the grid type from the drop-down list of Grid types as shown in Figure 10, then click the Browse button to browse to the grid file. After that click the OK button.

In the case that there are a number of sub-grids for a waterbody, the Multiple grid files option needs to be checked, then the user may browse to the folder containing the grid files. To select multiple grid files at same time, hold the Ctrl key and select the grid files, then click the OK button to load the grid files (see Figure 11 and Figure 12).

Figure 10.  Import from a grid file.

Figure 11  Import from multiple grid files - file selection.

Figure 12  Import from multiple grid files - resulting display.