EEMS has the capability to produce contour lines in 2DV. First, users need to set the parameter to plot on 2DV as described in New+2DV+View and 2DV+Data+Extraction. There are 2 two ways to display contour lines on 2DV, the first way . The first is to go to the show contour Show Contour button and check show contourShow Contour as shown in Figure 1. The second way is to RMC into legend and then select properties Properties for temperatureTemperature (if you are displaying temperature), . Then on the 2DV View Properties window Check on , check the Show Contours box to show the value contours of the layer layers as shown in Figure 2.
Anchor Figure 1 Figure 1
...
Figure 1 Show Contour Option in 2DV
Anchor Figure 2 Figure 2
Figure 2 2DV Properties form.
For contour Contour settings in 2DV are the same as in 2DH as . These are described in Export Contour Lines from 2DH after . After setting upthe properties, click the user clicks on the Ok button to see the contour lines displayed on the 2DV. To export these contour lines to a file, go to legend and then LMC after that Legend, LMC, and select Properties for Temperature then click . Click the Export button as shown in Figure 3 to export to a file.
Anchor Figure 3 Figure 3
Figure 3 Contour Range Setting.
...