Export Contour Lines from 2DV

EEMS has the capability to produce contour lines in 2DV. First, users need to set the parameter to plot on 2DV as described in New+2DV+View and 2DV+Data+Extraction. There are two ways to display contour lines on 2DV. The first  is to go to the Show Contour button and check Show Contour as shown in Export Contour Lines from 2DV#Figure 1. The second is to RMC into legend and then select Properties for Temperature (if you are displaying temperature). Then on the 2DV View Properties window, check the Show Contours box to show the value contours of the layers as shown in Export Contour Lines from 2DV#Figure 2.

Figure 1. Show Contour Option in 2DV

Figure 2. 2DV Properties form.

Contour settings in 2DV are the same as in 2DH. These are described in Export Contour Lines from 2DH. After setting the properties, click the Ok button to see the contour lines displayed on 2DV. To export these contour lines to a file, go to Legend, LMC, and select Properties for Temperature. Click the Export button as shown in Export Contour Lines from 2DV#Figure 3 to export to a file.

Figure 3. Contour Range Setting.