The Spline Each spline layer has a range of special options that are may be accessed by RMC on the spline layer title in the tree view (Figure 1). These options are summarized in the Table 1.
...
RMC on the spline layer, then select Properties, and the Spline Properties will be displayed, as shown in Figure 2. The options here include:
- Layer Name: show shows the name of the layer, a new name can be entered here
- Layer Visible: unchecking this box will hide the spline layer (the light bulb of the layer in the the Control Panel is also turned off)
- Line Settings: allows the changing of setting style, color, and thickness of the spline lines.
...
This option only appears from the RMC 's option when it meets the condition to generate a grid (there are i.e.at least four splines at least are crossing). After selecting the Create Grid option, the Create Grid from Splines form is displayed as shown in Figure 3, define . Define the number of intervals in the I and J direction then click the OK button, a grid will be generated. The Create Grid also can be accessed from a button from the main toolbar as shown in Figure 4.
...