The Shellfish Farm module has been developed to simulate flow fields around the mariculture rafts and the impact of cultivation practices on the growth and development of any species of shellfish.
This module can only be activated by checking on the Use box of the Shellfish Farm Options from the Biota tab of the Water Quality form as shown in 499679491 Figure 1.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 1. Activate Shellfish Farm Module.
When the user clicks the OK button (499679491Figure 1), the Shellfish Farm sub-module will be added to the Modules on the Model Control. RMC on Shellfish Farm module sub-tab under the Modules tab, then click the Settings option to open Shellfish Farm form as shown in 499679491 Figure 2 below (the Shellfish Farm form can also be accessed by clicking on the Modify button in 499679491 Figure 1). In this form, first set the Number of Shellfish Species. The form has five six other tabs below: Model Settings, Shellfish Species, Farm Settings, Initial Conditions, Harvest Time and Initial ConditionsHarvest Rate. Each tab has a range of parameters that may be configured as described in the following sections.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 2. Shellfish Farm Settings.
Model Settings
In Model Settings it is necessary to check the Interact with Water Quality Module box to link the input data of water quality parameters (as shown in 499679491) to the water quality module in EFDCin Figure 3) to the water quality module in EFDC.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 3. Shellfish Farm Model Settings.
The interaction of the shellfish farm with water quality parameters depends on the number of water quality parameters simulated in the water quality module settings as shown in
...
Figure 4. A value of 1 or 0 means that the parameter simulated or not simulated respectively.
| Anchor | Figure 3 | Figure 3 |
|---|
|
| Anchor | |||
|---|---|---|---|
|
Figure 4. Water Quality Parameters Simulation Settings.
Editing Species
In the Shellfish Farm form the user should identify the Number of Shellfish Species they want to add to the model and then define the characteristics of each species. Click on the Edit Species button to open the Shellfish Species form to set species characteristics.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 5. Edit Shellfish Species.
In this form the user can set the name of the species to be simulated. The shellfish parameters should be based on the aquatic ecological characteristics of this species. These parameters can be defined by eight tabs (From 499679491 Figure 6 to 499679491 Figure 13): General, Infiltration, Respiration, Growth, Mortality, Excretion, Spawning, Larvae. Refer to the EFDC+ Theory Guide to learn how these parameters impact the shellfish life cycle. The larvae characteristics are for information only at this stage and not user configurable.
When defining characteristics of the shellfish completed, the characteristics are also displayed on the Shellfish Species tab as shown in the 499679491 Figure 14.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 6. Shellfish species characteristics : General.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 7. Shellfish species characteristics: Infiltration.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 8. Shellfish species characteristics: Respiration.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 9. Shellfish species characteristics: Growth.
Anchor Figure 10 Figure 10
Figure 10. Shellfish species characteristics: Mortality.
Anchor Figure 11 Figure 11
Figure 11. Shellfish species characteristics: Excretion.
Anchor Figure 12 Figure 12
Figure 12. Shellfish species characteristics: Spawning.
Anchor Figure 13 Figure 13
Figure 13. Shellfish species characteristics: Larvaespecies characteristics: Larvae.
Shellfish Species
In the Shellfish Species tab, the shellfish parameters for each species are listed in the table.
Anchor Figure 14 Figure 14
Figure 14. Shellfish Species Tab.
Farm Settings
In the Farm Settings tab (499679491Figure 15), the user should first assign the total number of model cells they want to configure to have shellfish in the Number of Shellfish Cells form using the Assign button. The Number of Farming Zones should also be set. The corresponding number of farming groups will be created in the Shellfish Farming Zones formtable. A farming zone will have particular characteristics. Currently, the farm type and the depth at which the farm is to be set are not used. However, the species death rate should be set for the number of individuals that die in that zone per day.
Anchor Figure 15 Figure 15
Figure 15. Farm Settings Tab.
Shellfish Initial Conditions
In the Initial Conditions tab assign the position and the initial number of individuals of the species as shown in 499679491 below. From this tab, under Initial Individuals and Harvest Rate frame,Figure 16 below.
- L, J, J columns: cell index of the shellfish farm
- Zone: Farm zone index
- IC# Species Name: Initial number of individuals
Anchor Figure 16 Figure 16
Figure 16. Shellfish Farm Initial Conditions.
Harvest Times
If shellfish harvesting to be simulated at certain time then this can be set in the Harvest tab. The Number of Harvests to be conducted during the simulation period should be entered. In the Harvest Settings form sets the mid-point of the harvest time of the shellfish as well as the minimum weight of shellfish that can be harvests harvested in grams of carbon. The day of harvest is the model Julian time. For example, if the model run time starts at day 1 then day 200 is the midpoint of the shellfish is harvest, with the calculation effectively instantaneous. The harvest will occur on that day, but will only apply to individuals larger than the minimum size, smaller individuals will not be harvested.
Anchor Figure 17 Figure 17
Figure 17. Harvest Times Tab.
Harvest Rates
In the Harvest Rate, the user can set the day and the rate of harvesting. Click the Edit button in the Harvest column, and the form for Harvest Rate Setting will be displayed.
Anchor Figure 18 Figure 18
Figure 18. Harvest Rates Tab.
In this form the user can set the day and harvest rate for this species in this cell as a proportion of the total number of individuals, with 0 meaning harvest, and 1 all individuals are harvested
...
...
.
Anchor Figure 19 Figure 19
Figure 19. Harvest Rates Setting.
After completing these settings, click the OK button to save the settings, close the form and finish configuring the shellfish module.
...