In the General tab, in the Erosion Rate Options frame, the user should select the last option as shown in Figure 1. This Using this option , the erosion rate will base be based on the equation E = A*Tau^N with A (Erosion Multiplier), N (Erosion Exponent) elements and Bed Properties Using where "A" is the erosion Multiplier, "N" is the erosion exponent, and applying the bed properties using SEDB, BEDLAY, BEDBDN and BEDDDN. "A" and "N" will be defined in Erosion Rates tab as shown in Figure 3.
Those files sedb.inp, bedlay.inp, bedbdn.inp and bedddn.inp are The files SEDB.INP, BEDLAY.INP, BEDBDN.INP and BEDDDN.INP are created by EE when the user assign assigns the bed initial condition conditions to the model. To assign the bed initial condition conditions to the model , the user click Assign Bed IC button, a form of . The Initialization of Sediment Beds appears as form will be displayed as shown in Figure 2.
In the Grid Cell Options frame , there are two options, : the user can selects select either All Grid Cells or Only Grid Cells Inside Polygons to limit the application of the change.
All Grid Cells: All grid cells of the mode domain will be assigned from a sediment core file
...