...
In the Diffuser Port Settings for Current Cell frame the user may specify the settings for each discharge cell including the number of ports, the elevation and the diameters of the port outlets, as well as the horizontal (azimuth) and vertical (altitude) angles.
...
The Entrainment Stop menu provides three options for stopping the entrainment: stop at a specified number of elements (ISTJP=0), stop when the centreline center-line penetrates the bottom or the surface (ISTJP=1), or stop when the boundary penetrates the bottom or the surface (ISTJP=2).
...
Jet/Plume Boundary Condition Editor illustrates an application of the jet/plume BC for a temperature distribution in the case of two diffusers in a weak flow stream.
...
| Anchor | ||||
|---|---|---|---|---|
|
Figure 2 Thermal Discharge from Multiport Diffusers using Jet/Plume BC.