Fit to Nearest Spline
Fit to Nearest Land Boundary
Refine Grid Block
The Refine Grid Block tool increases the resolution of the specific grid block. It operates by multiplying the existing number of cells in the current grid with (IC, JC) independently.
Select two gird nodes by holding the SHIFT key to define the grid block. RMC and select Refine Gird Block. Then, the Grid Block Refinement tab will appears. It is able to set the I and J refinement factor separately.
Figure. Grid before applying "Refine Gird Block"
Figure. Grid after applying "Refine Gird Block"
Coarsen Grid Block
The Coarsen Grid Block tool operates in an opposite way to that for Refine Grid Block. It decreases resolution of the grid.
Select two gird nodes by holding the SHIFT key to define the grid block. RMC and select Coarsen Gird Block. Then, the Grid Block Coarsening tab will appears. It is able to set the I and J coarsenig factor separately.
Figure. Grid before applying "Coarsen Gird Block"
Figure. Grid before applying "Coarsen Gird Block"
Delete Grid Block
Eliminate the select grid block
Line Mirror
Duplicate the gird to opposite site of the select line.
Figure. Select Line Mirror
Figure. New Grid Line
Line Smooth
The Line Smooth tool is used to smooth the grid domain and redistribute the distance between grid nodes. That will improve the accuracy of the model.
Figure Grid image before applying smoothing.
Figure Grid image after applying smoothing.
Line Attraction
Line Repulsion
Create Spline
Clear Selection
| Anchor | ||||
|---|---|---|---|---|
|
Figure 1
...