Versions Compared

Old Version 7

changes.mady.by.user Kester Scandrett

Saved on

compared with

New Version Current

changes.mady.by.user Kester Scandrett

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To help determine optimal grid refinement and analysis of bathymetric data, Grid+ provides options for viewing elevation profiles of cross-sections such as DEMs (Digital Elevation Model), and TIN (Triangulated Irregular Network). This page describes the options available for viewing elevation profiles for each data type of data.

View elevation profile of cross-sections

When a cross-section data file is availalbeavailable, it may be imported and view in Grid+. To do this, click the Import button from the main toolbar, then select Import Cross-Sections as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 1. After selecting that option, the Import Cross-Sections form will be displayed. Browse to the cross-sections file, then select Open button as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 2. The Coordinate System form will be displayed, and we must define the correct projection for the cross-section data file. Click the OK button to finish as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 3.

After importing the cross-section data, to locate in the cross-section location, RMC on the XS layer in the Layer Control, then select Zoom to Layer as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 4.

Anchor
Figure 1
Figure 1

Figure 1. Import cross-sections option.

Anchor
Figure 2
Figure 2

Figure 2. Import Cross-Sections form.

Anchor
Figure 3
Figure 3

Figure 3. Define Coordinate System.

Anchor
Figure 4
Figure 4

Figure 4. Zoom to Layer.

When the cross-section data file is opened in a text editor, it is seen that the last column (the third one) contains the elevation value, as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 5. Based on these values, we a range for the elevation color ramp of the cross-section may be set. Press Alt + C on the keyboard, and the Specify Elevation form will be shown. Enter the minimum and maximum values in the form, then click the OK button as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 6. The color ramp for cross-sections will be displayed as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 7.

Anchor
Figure 5
Figure 5

Figure 5. Elevation values in Cross-Section data file.

Anchor
Figure 6
Figure 6

Figure 6. Enter elevation range.

Anchor
Figure 7
Figure 7

Figure 7. Cross-sections color ramp.

Next, click the Add a New Polyline button from the toolbar as shown in Figure 8. Draw the start point of a polyline by LMC and the end point by RMC. Note that the polyline must overlay a cross-section. Select select the Selection mode by pressing the S key and then LMC on the polyline a cross-section to select it. Next, LMC on display options, Then its information is shown in the lower left corner as shown  in View Elevation Profiles#View Elevation Profiles#Figure 8. Next, RMC to display options and select View Cross-section Profile as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 9. The cross-section elevation profile is shown as the plot in Figure View Elevation Profiles#View Elevation Profiles#Figure 10.

Anchor
Figure 8
Figure 8

Image RemovedImage Added

Figure 8. Select add a polyline option.

Anchor
Figure 9
Figure 9

Image RemovedImage Added

Figure 9. View Cross-section Profile.

Anchor
Figure 10
Figure 10

Image RemovedImage Added

Figure 10 Enter elevation range. Cross-section elevation profile.

There are three buttons on the Cross-section Elevation Profile which allows the saving of the profile out, as shown in Figure View Elevation Profiles#View Elevation Profiles#Figure 11. They are described below.

OptionDescription

Image Modified

This option saves the profile to a file, which can be in *.txt or *.dat format.

After saving the profile to an external file, open the file in a text editor. Four columns will be displayed. The first two columns are coordinates (X, Y), the third one is the elevation (Z), and the last one is the length (L) calculated from the starting point.

Image Modified

This is copy profile data button. Once this button is selected, the profile is copied to the clipboard
,
and can be pasted to a text editor or Excel. The data contains two columns, one is X values, and the other is Y values of the plot.

Image Modified

This option allows saving the profile image to a file, which can be saved in different formats such as *png, *jpg, etc., as shown in
Figure
View Elevation Profiles#View Elevation Profiles#Figure 12.

Anchor
Figure 11
Figure 11

Image RemovedImage Added

Figure 11. Saving profile options.

Anchor
Figure 12
Figure 12

Figure 12. Export cross-section profile image.

View elevation profile of DEM

Update soon

View elevation profile of TIN

Update soonSuppose that a DEM data file is available. Click the Import button from the main toolbar, then select Import DEM as shown in View Elevation Profiles#View Elevation Profiles#Figure 13. After selecting that option, the Import Overlay Layer form will be displayed. Browse to the DEM file, then select Open button as shown in View Elevation Profiles#View Elevation Profiles#Figure 14. The Coordinate System form will be displayed, and we must define the correct projection for the cross-section data file. Click the OK button to finish as shown in View Elevation Profiles#View Elevation Profiles#Figure 15.

After importing the DEM data, to locate in the DEM location, RMC on the XS layer in the Layer Control, then select Zoom to Layer as shown in View Elevation Profiles#View Elevation Profiles#Figure 16.

Anchor
Figure 13
Figure 13

Image Added

Figure 13. Import DEM option.

Anchor
Figure 14
Figure 14

Image Added

Figure 14. Import Overlay Layer form.

Anchor
Figure 15
Figure 15

Image Added

Figure 15. Define Coordinate System.

Anchor
Figure 16
Figure 16

Image Added

Figure 16. Zoom to Layer.

Next, click the Add a New Polyline button from the toolbar, draw the start point of a polyline by LMC and the endpoint by RMC. Note that the polyline must overlay the DEM area. Select the Selection mode by pressing the S key and then LMC on the polyline to select. Next, RMC to display options, and select Show DEM or TIN Profile as shown in View Elevation Profiles#View Elevation Profiles#Figure 17. The DEM profile is shown as the plot in View Elevation Profiles#View Elevation Profiles#Figure 18.

Anchor
Figure 17
Figure 17

Image Added

Figure 17. Show DEM Profile.

Anchor
Figure 18
Figure 18

Image Added

Figure 18. DEM Profile.