Versions Compared

Old Version 5

changes.mady.by.user Duy Pham

Saved on

compared with

New Version Current

changes.mady.by.user Kester Scandrett

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Sometimes moving grid nodes is necessary while making a grid. This section introduces how to move a single node or a set of nodes

Move single grid node

To move a node, click down on it
  1. Select a grid layer in the Layer Control;
  2. Select the Mode node button from the main toolbar, the cursor changes to a hand symbol (2120482850);
  3. Click down on a node, drag it to
its
  1. a new position, and then release the mouse button.
If you wish to move a set of nodes and the links between them, select the nodes you wish to move, then click down on one of them and drag the set to the new desired location.dffsd
  1. To escape this mode, press the S key.

.

Anchor
Figure 1
Figure 1

Image Added

Figure 1. Move a grid node.



Fit to nearest spline

Suppose Imagine that there is a number of cells that are far from a spline near the grid, now we want to move the edge grid nodes on a grid line segment to that spline, as shown in Figure 1. First, select the shoreline. The Fit to nearest spline option can be used to move them forward to the shoreline.

  1. Select Add a new spline to draw a spline;
  2. LMC on the selected grid layer, hold the Shift then LMC on two edge grid nodes on the same grid line segment, the segment will be highlighted (its color is purple), LMC on the third grid node to define the impacted area. Next, RMC to show options and then select Fit to Nearest Spline option, as shown in 2120482850.
Figure 2 shows grid after selecting Fit to Nearest Spline option
  1. As a result, a set of nodes fit the spline as shown in Figure 2.

Anchor
Figure 1
Figure 1

Image RemovedImage Added

Figure 1 LMC . Fit to Nearest Spline options.

Anchor
Figure 2
Figure 2


Figure 2. Grid nodes after selecting " Fit to Nearest Spline "option.


Fit to nearest land boundary

Suppose that there is a land boundary line (overlay) near the grid, now we want to move the edge grid nodes on a grid line segment to that land boundary, as shown in Figure 3. First, select the grid layer, hold the Shift then LMC on two edge grid nodes on the same grid line segment, the segment will be highlighted (its color is purple), LMC on the third grid node to define the impacted area. Next, RMC to show options then select Fit to Nearest Land Boundary option. Figure 4 shows grid after selecting This option operates similar to the Fit to Nearest Spline option that is described above. The difference is instead of drawing a spline, do draw a polyline. 2120482850 shows the Fit to Nearest Land Boundary option.

Anchor
Figure 3
Figure 3


Figure 3 LMC options. AnchorFigure 4Figure 4

Image Removed

Figure 4 Grid nodes after selecting " Fit to Nearest Land Boundary "option.