Page Comparison

Figure 1 shows The main toolbar in Grid+ provides all of the options most important for building and refining grid. The buttons from the main toolbar , are shown in 1149960298 and their functions are described in the table below.

Image RemovedImage Added

Figure 1. Main toolbar buttons.

Buttons	Description
	This button is reset to a new project. It will clear The New Project button clears all the data in the workspace, and the user will start working with on a new project.
	The Load button will loads a project saved on the computer's hard drive or in some external memory.
	The Save button allows saves the user to save the entire project to one .CVP2 file.GPP file. This is a general layout file, not the grid file loaded into EE.
	The Import button allows to import imports external files (see below for details).
	The Export button allows to export exports the grid to different grid types (see below for details).
	Toggle the Layer Control on/off.
	View full layer extent.
	Restore the previous view.Image Removed	Add a new polyline.
Image Removed	Add a new spline.
Image Modified	Select object
Image RemovedImage Added	Add Mode node: this allow allows to will add move grid node in general, node can be grid , polyline node, nodes of polyline or spline node.
Image RemovedImage Added	Mode Add node: this allows to move will add a node in general. A node can be a grid node, a node of polyline node, or spline nodesplines.
Image Modified	Delete node: this allows to remove the grid node, polyline node, or spline node.
Image Added	Edit objects by polygon
Image Added	Add a new polyline.Image Removed
Image Added	Add a new spline.
Image Added	Undo operation
Image Added	Redo operation
Image Added	Create a grid from splines
	Create a rectangular grid
	Create a radial grid
	Refine grid
	Coarse grid
	Orthogonalize grid
	Merge two grids
Image Added	Global settings
Image Added	Measurement Tool
Image Added	Frame control: To add the North Arrow and Scale bar

The Import button provides a number of options as shown in 1149960298. These options are described in the table below.

Import Grid: open different types of the grid file as native grid type of Grid+, RGF grid, ECOMSED grid, SEAGRID, etc.

Import EFDC Model: open the EFDC input file (e.g corners.inp, dxdy.inp, lxly.inp)

Import Georeferenced Image: open a georeferenced background image (e.g *.jgw, *.geo)

Import Overlay: open an overlay file as shoreline, polyline, polygon (*.p2d, *.shp)

Import Splines: open the splines file (*.spl), this is a native file created from Grid+

Import Labels: open the label file (*.dat, *.p2d), this file has three columns. Two columns for coordinates (X, Y), and the third column is label names.

Import Cross-Sections: open the cross-section file (*.ldb, *.p2d), this file has three columns. Two columns are for coordinates (X, Y), and the third column is for elevation.

Import DEM: open the DEM (Digital Elevation Models) file (*.txt, *.asc, *.grd, *.tb2). DEMs are files that contain either points (vector) or pixels (raster), with each point or pixel having an elevation value.

Import Scatter Data: open the scatter dât file (*.xyz, *.dat) this file has three columns. Two columns are for coordinates (X, Y), and the third column is for elevation.

Image Added

Figure 2. Import Menu.

The Export button provides a number of options as shown in 1149960298 . These options are described in the table below.

Export Grid: export the selected grid layer to the native grid file of Grid+ (*.gpc), CVLGrid (*.cvl), Delft3D (*.grd), and others.

Export to EFDC: export the selected grid layer to EFDC input files. The three files produced are the corners.inp, dxdy.inp, lxly.inp. Doing this allows the user to edit a grid and then reopen it in EEMS without changing the boundary conditions. If the user wants to create a wholly new model, including the EFDC.INP etc, then that should be done in EE rather than in Grid+ .

Export to Shapefile: export the selected grid layer to the shapefile, which can open with ArcGIS, QGIS, Global Mapper, and others.

Export to KML: export the selected grid layer to the KML file, which can open with Google Earth, Global Mapper, and others.

Export Graphics: export the workspace to an image file with various file formats as *.png, *.jpg, and others.

Image Added

Figure 3. Export Menu.