...
- Access from the toolbar button, as shown in Working with Projections in Grid+.
- Access from the File menu, as shown in 2479915036 Working with Projections in Grid+.
- Access from the Tools menu, as shown in 2479915036in Working with Projections in Grid+.
When the Projection Settings is selected, the Projection Settings form will appear as shown in Figure 4. As mentioned in the information box below, The user is not able to change the coordinate system from this form as Grid+ chooses the WGS84 geographic coordinate system as a default setting. It means that when we create any files from Grid+ and then export them to external files, their coordinates are in Latitude and Longitude. Figure 5 shows coordinates of a spline file when opening with the Notepad editor as an example. The first line of the file provides information on the coordinate system.
...
To do this, select the grid layer from the Layer Control panel, then Right-mouse click (RMC), select Properties as shown in 2479915036in Working with Projections in Grid+. After that Grid Settings form will appear. Select Coordinate System tab, as shown in 2479915036in Working with Projections in Grid+, and then click the Convert button. The form for the Coordinate System will pop up, as shown in 2479915036in Working with Projections in Grid+. Now, we need to define the correct target coordinate system to which we want to convert. In this case, we select UTM zone 17 in the northern hemisphere, then click OK button. Next, click OK button in the form of 2479915036 Working with Projections in Grid+ to close it. Coordinate system conversion is now complete.
Anchor Figure 1 Figure 1
Figure 1 Access projection settings from a toolbar button.
Anchor Figure 2 Figure 2
Figure 2 Access projection settings from File menu.
Anchor Figure 3 Figure 3
Figure 3 Access projection settings from Tools menu.
Anchor Figure 4 Figure 4
Figure 4 Projection Settings form.
Anchor Figure 5 Figure 5
Figure 5 Open a generated file by Grid+ with the Notepad editor.
...
In this step, we will export the grid to an external grid file. Select the grid layer from the Layer Control panel, then RMC, select Export/Export Grid as shown in 2479915036in Working with Projections in Grid+. After that Export Grid form will appear, enter a file name and click Save button, as shown in 2479915036in Working with Projections in Grid+.
Opening the grid file with the Notepad editor, we can see that the file contains UTM zone number information (e.g., 17 means that UTM zone 17, in the northern hemisphere) and coordinates values are Easting and Northing in units of meters, as shown in 2479915036 Working with Projections in Grid+. The UTM zone number will be negative for the southern hemisphere, as shown in 2479915036in Working with Projections in Grid+.
| Info |
|---|
For a file that is converted from geographic coordinates to UTM zone by Grid+, do we need to define a coordinate system when opening it by Grid+? The answer is no because Grid+ will get projection information in header lines from the file and locate it in the correct place. |
...
In this case, we consider the shoreline as an overlay file so that we will click the Import button from the toolbar, then select Import Overlay as shown in 2479915036in Working with Projections in Grid+. The Import Overlay Layer form will pop up. Select the file and click Open button, as shown in 2479915036in Working with Projections in Grid+. As a result, a new shoreline layer is added to the Layer Control panel, as shown in 2479915036 Working with Projections in Grid+. However, when we RMC on that layer and select Zoom to Layer option, it is not located in the place we expected. This is because the file does not contain the coordinate system information, so Grid+ does not know where it should be located. This means we must make the shoreline located in the right places in the online background map.
To correctly configure the shoreline location, we must define the correct projection (coordinate system) to the file. RMC on that layer and then select Properties option. The Overlay Properties form will pop up. Select the Coordinate System tab and click the Define button as shown in 2479915036 Figure 16. The Coordinate System form will appear, as shown in 2479915036 Figure 17, and we will select the correct projection from this form. The projection should be known by the user. In this case, we select UTM zone 17, northern hemisphere. After that, click OK button. This form will close and go back to the form in 2479915036 Working with Projections in Grid+. Next, click OK button to close the form. The process for defining the coordinate system is completed. RMC on the shoreline layer and select Zoom to Layer, and it will be located in the correct location, as shown in 2479915036 Working with Projections in Grid+.
Anchor Figure 13 Figure 13
...