...
The values that represent the blue and red ends of the color ramp can be specified. The direction of the color ramp depends whether the blue value is > or < the red value. If the Autoscale with View option is selected then the blue and red range will be reset to the minimum and maximum values for the current parameter that are within the current viewport.
From release of EE7.3 the The user has a number of options for displaying Color Ramps in ViewPlan and View3D. The typical choice is the temperature color ramp which shows blue for low values and red for high values. Many other color ramps are now available from the dropdown list. If the user selects Single Color from the dropdown then the color ramp will use a gradient based on the Single Color option selected beneath the drop down list.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 1 ViewPlan Display Options: General Options.
...
The display of the horizontal scale is optional. The units are set in the Units dropdown list. The scale units are set independently of the current reporting units (Reporting Units).
A grid can be overlaid on the model using Coordinate Grid options. The desired delta X and delta Y spacing should be entered in the Easting and Northing fields, respectively. The label and line styles can be adjusted by pressing the Modify button. On the formatting form, the user can select the Link check box to assign the same format for both the X and Y.
ViewPlan will display a north arrow when the Show box is selected in the North Arrow Options frame. The user may also rotate the arrow to align with the actual northerly direction by rotation the arrow clockwise by the number of degrees input. Furthermore, a Model Rotation option enables the user to rotate the model for display, thereby allowing it to fit better on the screen or printed page and improve visual alignment. As the model rotates, the north arrow automatically is updated based on the new rotation selected. While EE could previously rotate the model domain about a centroid, this new feature from release of EE7.2 changes the real co-ordinates in order to rotate the model.
...
| Anchor | ||||
|---|---|---|---|---|
|
Figure 2 ViewPlan: Model Rotation.
The legend is always displayed by default, however, the user may choose to display or hide the legend with Show Legend check-box.