The use of shortcut keys convention is summarized in Table 1.
Table 1 Keys conventionShortcut keys.Anchor Table 1 Table 1
| Keys | Description |
|---|---|
| LMC | Left Mouse Click on an object to select that object |
| RMC | Right Mouse Click |
| Mouse Scroll | To zoom in/out |
| RMC on the selected layer | LMC on the selected layer to show options, the options are different for each type of layer. |
| Down | Move the | working space upward
| Down arrow | Move the working space downward |
| Left arrow | Move the working spacecurrent view down |
| Up | Move the current view up |
| Left | Move the current view to the left |
| Right arrow | Move the working space to the rightthe current view to the right |
| D | Delete Mode |
| I | Insert Mode |
| S | Select Mode |
| M | Move/Replace Mode |
| R | Move/Replace Mode |
| O | Orthogonalize Grid |
| Ctrl + N | New Project |
| Ctrl + O | Open Project |
| Ctrl + S | Save Project |
| Ctrl + Alt + S | Save Project As |
| Ctrl + E | Zoom to full extent |
| Ctrl + G | Go to a Position |
| Ctrl + M | Measurement Mode |
| Ctrl + R | Refine Grid |
| Ctrl + D | Coarsen Grid |
| Ctrl + Y | Redo Action |
| Ctrl + Z | Undo Action |
| Shift + LMC | Select a grid line segment or grid block |
| Shift + RMC | Use this combination and move the cursor to move the working space |
| Shift + LMC (layers) | Use this combination to select a range of layers at the same time |
| Ctrl + LMC (layers) | Use this combination to select multiple layers at the same time |
...