1149829275 shows buttons from the main toolbar, their functions are described in the table below.
...
Figure 1 Main toolbar buttons.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
The following steps introduce how to create grid:
- From the Splines menu, select Draw a New Spline or click on the Add a new spline button from main menu.
- LMC to start drawing spline, RMC to end drawing spline. Two first splines need to be done.
- Next, keep using the drawing splines mode, LMC on the first node of the first spline then RMC on the first node of the second spline.
- Next, LMC on the second node of the first spline then RMC on the second node of the second spline.
- Result is a closed splines created from four splines.
- Next, select the Select object button from main toolbar, LMC on inside the splines, then splines will be highlighted (turn into red)
- From the Splines menu, select Create Grid from Splines or click on the Create Grid from Splines button from main menu.
| Anchor | ||||
|---|---|---|---|---|
|
Figure 1 Select splines to highlight.
Anchor Figure 2 Figure 2
Figure 2 Create Grid from Splines form.