The table below is an example for harmonic constituents for Trakhuc estuary.
Name | Speed(deg/hr) | Amplitude (m) | Phase (s) |
---|---|---|---|
Q1 | 13.3987 | 0.04 | 126.073 |
O1 | 13.943 | 0.261 | 146.432 |
P1 | 14.9589 | 0.097 | 182.577 |
K1 | 15.0411 | 0.293 | 185.991 |
N2 | 28.4397 | 0.04 | 59.376 |
M2 | 28.9841 | 0.185 | 75.861 |
S2 | 30 | 0.072 | 114.865 |
K2 | 30.0821 | 0.025 | 95.187 |
STEPS FOR ADDING INPUT HARMONIC CONSTITUENTS TABLE
Figure 1 Assigning tidal boundary conditions.
Figure 2 Preparing the harmonic and tidal boundary series.
Figure 3 Tides Series Plot.
to assign tides to the open boundary cells, steps are introduced in section 4.3.2 (Build a 3D Coastal Model (Level 2 Step-by-Step Guidance). However, instead of choosing tidal series for Pressure, the user selects the series for Harmonic as shown in Figure 4.
Figure 4 Assign tides boundary.