In the 2DH View window, EE10 has the option of setting the layer properties displayed on the legend. This can be achieved by RMC on the selected legend in Layer Control frame.
Layer Properties Settings Figure 1 shows Properties option from RMC on the Bottom Elevation layer as an example. When Properties is selected the Layer Properties form is displayed as shown in the Layer Properties Settings Figure 2. The options on this form vary depending on the specific layer being selected. An example of two forms are shown in Layer Properties Settings and Layer Properties SettingsFigure 2 and Figure 3 for bottom elevation and Model Grid layers respectively. The various options in these forms are described in more detail below.
...
Auto-Scale with View: Checking this box, EE will automatically take the minimum and maximum values from the viewing zone in the model domain. For example, when the user moves the model domain or zooms in/out the minimum and maximum values are updated and displayed on the legend.
Min. Value: This shows the minimum value of the layer; Max. Value: This shows the maximum value of the layer. The user can enter values for these fields unless the Automatic Range is Range is unchecked.
Filled with Color Ramp: This box displays values of the layer with a color ramp or solid color
...
Color Ramp: When the Filled with Color Ramp box is checked, the user can select different color ramp options from the drop-down list. The options available are shown below. Options such as as viridis as Viridis and plasma Plasma are provided to more accurately represent certain data types. These saturation/lightness change linearly and are colorblind-friendly.
Figure 4. Color Ramp options.
Under Range Color: Set a color for values which that are less than the Min. Value
Over Range Color: Set a color for values which that are greater than the Max. Value
...
Legend Format: This is used to set the significant figures for the minimum and maximum values displayed on the legend. As default, EE sets F3 for this field. However, the user can change this by double-clicking on the box and the Number Format form will be displayed as shown in Layer Properties SettingsFigure 5. The user can change Decimal Digits by entering a number or using the Up and Down arrows (e.g 0 - integer number, 1 - one decimal digit, 2 - two decimal digits, etc).
Cell Overlap: Is the number of overlapped pixels between adjacent cells.
...
Settings: To set contour settings
Layer Properties SettingsFigure 6 details the names of display option in the legend for bottom elevation from the Layer Properties settings.
...