...
- In the Initial Conditions Tab: select the Sediment Initial Condition Options. There are 2 options to initialize bed layers: Uniform bed and use initial data file.
- Initialize the sediment bed from file, browse for the input sediment file
- Check Use sediment cores with grain size
- Define the maximum grain size for each size class relatively to cohesive and non-cohesive layers as displayed in the in the red frame in Figure 2.
If the required information has been entered then the Apply button is visible. After clicking on Apply, the sediment bed will be initialized.
Figure 1 Sediment Bed Model: Cohesives Tab.Anchor Figure 1 Figure 1
| Anchor | ||||
|---|---|---|---|---|
|