The function displays the cell as stored in computer memory. Figure 1 shows an example cell map using the Uniform Grid option. The I and J axes can be labeled, as they are in this example.
...
Figure 1. Cell Map.
Cells can be deactivated or activated using this view. RMC'ing on a cell pops up a menu that allows the user to Set as Show IJ or Deactivate (Figure 1). Deactivated cells are still defined and are in memory. The number of active cells does not change until the user saves the project. When the user reloads the project the deactivated cells will be completely removed.
Retaining deactivated cells in memory allows the user to reactivate a cell without losing information, if needed, during the cell editing process. To reactivate a deactivated cell or an originally deactivated cell, RMC on the cell and select activate. If the cell was previously activated it will just change the active cell flag to on. On the other hand, if the cell was not previously activated EFDC_Explorer looks to the immediately adjacent active cells to try to set the appropriate cell dimensions, depth, rotation, etc. Because EFDC_Explorer is using adjacent cells to assign properties, the user should add cells in a manner that has the most active cells adjacent to the cell being activated. The cell properties are displayed to allow the user the opportunity to make adjustments to the cell properties before accepting the activation.
...
The function is described in Main Menue Cell Map.